| |
 |
VPort D351 New!
1-channel MJPEG/MPEG4 Industrial Video Decoder
|
|
 |
Quickview |
 |
|
|
|
 |
 |
Decode MJPEG and MPEG4 video streams to analog video signal automatically |
|
Manual selection or automatic scan with maximum of 64 video sources |
|
2-way (1 in/1 out) audio supported |
|
Transparent PTZ control with legacy PTZ controller |
|
SNMP for network management |
|
| |
|
| |
|
Introduction |
|
|
| |
The VPort D351 is a 1-channel video decoder for decoding MJPEG/MPEG4 video streams from VPort series video encoders (not include VPort 2110, VPort 2140, VPort 3310, VPort 2141, and VPort 3310) and VPort IP
camera back to analog video signals. The analog video signal can
be sent to legacy CCTV devices, such as monitors, multiplexers, and
matrix switches, which can be used as originally intended as part of
CCTV systems. In addition, bi-directional audio enables ready-to-use
voice-over-IP communication between the video encoder and decoder.
Monitoring cameras that are part of large CCTV systems is easy with
the VPort D351, which can be set up to switch between different video
sources either manually or automatically within a given time interval.
Up to 64 video sources can be included in the list. In addition, the 2
DIs located on the top panel of the VPort D351 can be used to create 2
control buttons for up and down video source selection.
Video Networking Solutions >>
|
|
 Back to Top |
|
Features |
|
|
|
|
|
 |
High Performance Video/Audio Networking Solution |
| |
|
1-channel video output for analog NTSC/PAL video signal |
| |
|
1 audio input and 1 audio output for 2-way voice communication |
| |
|
1 auto-sensing 10/100BaseT(X) Ethernet port |
| |
|
TCP, UDP, HTTP, and Multicast network transmission modes |
| |
|
1 RS-232/422/485 PTZ port with serial-to-Ethernet Real COM mode for remote PTZ control with existing legacy PTZ control devices (PTZ control driver not required) |
| |
|
Can decode different video stream resolutions from video encoder with maximum 540 TVL line |
| |
|
Up to 64 video sources can be set up as the decode video source |
| |
|
Can manually select the video source, or configure to scan the video sources automatically |
| |
|
Supports switching the video source with the 2 digital inputs |
| |
|
Built-in web server, Telnet, and RS-232 console for remote access and configuration |
| |
|
SNMPv1/v2c/v3 for network system integration and management |
| |
|
Support OSD (On-screen Display) |
| |
|
UPnP and IP filtering supported |
|
Industrial Rugged Design |
| |
|
2 12/24 VDC and 24 VAC redundant power inputs with LED indicators |
| |
|
35 mm DIN-Rail mounting, or panel mounting (with optional kit) |
| |
|
IP30 form factor protection |
| |
|
CE, FCC and UL certified |
|
Intelligent Alarm Triggered Capability |
| |
|
Equipped with 2 DIs and 2 Relays (DOs) for external sensors and alarms |
| |
|
Can setup automatically switch to the specific video source once an evnet is trigged in VPort encoder |
| |
|
Support SNMP for system or alarm message transmission |
|
|
|
|
Back
to Top
|
|
Specifications
|
|
|
|
| Video |
|
|
|
| MPEG4, MJPEG (Auto detecting) |
|
|
|
| Video streams from VPort series video encoders and VPort IP cameras over TCP/IP networks (not include VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310) |
|
|
|
|
| 1, BNC connector, NTSC or PAL |
|
|
|
|
|
| Up to 64, selected manually by web server or digital inputs, or selected automatically by scanning within a set time interval |
|
|
|
| Max. 30/25 FPS (NTSC/PAL) can be decoded
OSD (on-screen display) with video source, video source IP, date/time, and customized information |
|
|
|
|
| |
| Audio |
|
|
|
| |
| Network |
|
|
| TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, SNMPv1/v2c/v3 |
|
|
|
| 1 RJ45 port, 10/100BaseT(X) auto negotiation |
|
|
|
|
| |
| Serial Port |
|
|
|
| 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps baudrate |
|
|
|
|
|
|
|
| |
| GPIO |
|
|
2, max. 8 mA
"High": +13V to +30V
"Low": -30V to +3V |
|
|
|
|
|
|
| |
| LED Indicators |
|
|
| Indicates if system booted up properly or not |
|
|
|
|
|
|
|
|
|
| Can be configured to correspond to system alarm, power failure, video loss, or disconnected network |
|
|
|
|
| |
| Physical Characteristics |
|
|
| IP30 protection, metal case |
|
|
|
|
|
|
|
|
|
|
| DIN-Rail mounting, wall mounting (optional kit) |
|
|
|
|
| |
| Power Requirements |
|
|
|
| 2 12/24 VDC and 24 VAC power inputs with redundancy |
|
|
|
|
| |
| Environmental Limits |
|
|
|
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
| Ambient Relative Humidity |
|
| 5 to 95% (non-condensing) |
|
|
|
|
| |
| Regulatory Approvals |
|
|
|
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 2
EN61000-4-12 (Oscillatory wave immunity),
level 3 |
|
|
|
|
|
|
|
|
|
|
| |
| Warranty |
|
|
| |
| Alarm Features |
|
|
|
| Automatically switch to the video source once an event is triggered |
|
|
|
|
| |
| PAN/TILT/ZOOM |
|
|
|
| Transparent PTZ camera control with legacy PTZ controller through the RS-232/422/485 port |
|
|
|
|
| |
| Security |
|
|
|
| User level password protection
IP address filtering |
|
|
|
|
| |
|
|
Ordering
Information
|
|
|
| |
 VPort D351 |
|
| 1-channel MJPEG/MPEG4 industrial video decoder, 12/24 VDC and 24 VAC redundant power input, 0 to 60°C |
|
|
|
| |
| Optional Accessories |
|
|
| 45W/2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
| 75W/3.2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
| 120W/5A DIN-Rail 24 VDC Power Supply with 88 to 132 VAC/176 to 264 VAC input by switch |
|
| WK-46 |
|
|
|
|
| 4U-high 19" rack mounting kit |
|
|
|
| |
|
|
|
