MOXA AirWorks 1100 Series---Industrial IEEE 802.11g Wireless AP, Bridge, AP Client

About Moxa

Products

Solutions

Support & Service

News & Events

Where to Buy

Partner Zone

You are here: Home > Products > Wireless Ethernet Products > Wireless AP/Bridge/AP Client > AWK-1100

AWK-1100 Series
Industrial IEEE 802.11g/b Wireless AP/Bridge/AP Client

Quickview

View Larger Picture


Features	Datasheet (PDF)
Specifications	Documentation & Drivers
Serial-to-Wireless Flash Demo	Technology Tutorials NEW!
Ordering Information

	IEEE 802.11b/g compliant
	Power input by redundant 24 VDC power inputs or Power-over-Ethernet
	Powerful security with WPA/802.1X/MAC address filtering
	DIN-Rail mounting ability
	Case design meets IP 30 protection standard

Introduction

Do you have some hard-to-wire situations? Do your applications use mobile equipment which is connected over a TCP/IP network? Or you have cost concern for installing wire? Now you have a ideal solution, the AWK-1100 Access Point/Bridge/AP Client. AWK-1100 is rated to operate at temperatures ranging from 0 to 60°C and is rugged enoughfor any harsh industrial environment. Installation is easy, with either DIN-Rail mounting or distribution boxes. The DIN-rail mounting ability, wide operating temperature range, and IP30 case with LED indicators make AWK-1100 a convenient and yet reliable solution for your industrial wireless applications.

Technology Tutorials >>

Features

Advanced Security Capability

		64-bit and 128-bit WEP (Wired Equivalent Privacy)
		Enable/disable SSID broadcasts
		MAC-address-based access control
		IEEE 802.1X/RADIUS
		WPA (Wi-Fi Protected Access)
	Useful Utilities and Remote Configuration

Firmware upgrade from TFTP or HTTP

Configuration backup and reset

Web-based management

Supports SNMP and UPnP

Industrial-grade Design

Operating temperature range from 0 to 60°C

Power input by redundant 24 VDC power inputs or Power-over-Ethernet

DIN-Rail or panel mounting capability

Case design meets IP30 protection standard

Specifications

WLAN

Standards

IEEE 802.11g/b for Wireless LAN,
IEEE 802.3u 10/100BaseTX for Ethernet LAN,
IEEE 802.3a for Power over Ethernet

Frequency Range

2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)

Data Rate & Modulation

OFDM@54 Mbps, CCK@11/5.5 Mbps, DQPSK@2 Mbps, and DBSK@1 Mbps

Operating Channels

USA: 1-11 (US)
Europe: 1-13 (EU)

Security

64-bit and 128-bit WEP encryption, WPA (IEEE 802.1X/RADIUS and TKIP)

Data Rates

1 Mpbs, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps,
18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps

Transmit Power

Typ. +18 dBm(+/- 1.5 dBm) @ 11Mbps, +14 dBm (+/- 1.5 dBm) @
54Mbps

RX Sensitivity

802.11b:
-81 dBm @ 11 Mbps, -85 dBm @ 5.5 Mbps,
-86 dBm @ 2 Mbps, -87 dBm @ 1 Mbps
802.11g:
-68 dBm @ 54 Mbps, -70 dBm @ 48 Mbps,
-74 dBm @ 36 Mbps, -78 dBm @ 24 Mbps,
-81 dBm @ 18 Mbps, -84 dBm @ 12 Mbps,
-85 dBm @ 9 Mbps, -86 dBm @ 6 Mbps

Software Features

Protocols

HTTP, DHCP, TCP/IP, RADIUS, DNS, NetBIOS, AppleTalk, and IPX/SPX

Configuration

Web-based management

Client OS Support

Windows 95/98/2000/ME/NT/XP, Unix, and Macintosh

Interface

Antenna

2 dBi Omni-directional antenna with an R-SMA connector

RJ45 Port

10/100BaseT(X) auto negotiation speed

LED Indicators

PWR1, PWR2, LAN (Link/ACT), WLAN (Link/ACT)

Power

Input Voltage

12 to 45 VDC, redundant dual DC power inputs or
48 VDC Power-over-Ethernet (IEEE802.3af)

Input Current (@24V)

0.3A

Overload Current Protection

1.6A

Connection

Removable Terminal Block

Reverse Polarity Protection

Present

Mechanical

Casing

IP30 protection, metal case

Dimensions (WxHxD)

53.6 x 135 x 105 mm
2.11 x 5.31 x 4.13 in.
View Dimension Drawing >>

Installation

DIN-Rail or Wall Mounting (optional kit)

Environmental

Operating temperature

0 to 60°C (32 to 140°F)

Storage temperature

-20 to 70°C (-4 to 158°F)

Ambient Relative Humidity

5% to 95% (non-condensing)

Regulatory Approvals

Safety

EN60950-1: 2001, UL60950-1

Hazardous location

UL/cUL Class 1, Division 2, Groups A, B, C and D
ATEX Class 1, Zone 2, EEx nC IIC (pending)

Radio

EN300 328

EMC

EN301 489-1/-17

EMI

FCC Part 15C

MTBF

200,000 hrs
Database: MIL-HDBK-217F, GB 25˚C

Warranty

5 years

Ordering Information

AWK-1100-US

IEEE 802.11g/b Wireless AP/Bridge/AP Client, 0 to 60°C, US band

AWK-1100-EU

IEEE 802.11g/b Wireless AP/Bridge/AP Client, 0 to 60°C, Euro band

AWK-1100-JP

IEEE 802.11g/b Wireless AP/Bridge/AP Client, 0 to 60°C, Japan band

IEEE802.11g/b Omni & Directional Antennas

ANT-1-O-09

2.4 GHz, omni-directional, 9 dBi Antenna, N-Female connector

ANT-1-D-12

2.4 GHz, directional, 12 dBi Antenna, N-Female connector

CRF-N0117SA-3M

CFD200 cable, N-Male to RP SMA Male connector, 3 meters
This cable is needed to connected the optional antenna to the AWK-1100

HA-1002SU

Swivel Mounting Kits, swivel angle 90° horizontal, 40° vertical
Supports ANT-1-D-12 by adjusting the angle for use with different wireless applications.

Optional Accessories

DR-4524

45W/2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input

DR-75-24

75W/3.2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input

DR-120-24

120W/5A DIN-Rail 24 VDC Power Supply with 88 to 132 VAC/176 to 264 VAC input by switch

WK-46

Wall Mounting Kit