| |
|
| Modular Managed Switch System, EDS-82810G |
 |
| |
 Technology |
|
|
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3ab for 1000BaseT(X),
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1W for Rapid STP,
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1p for Class of Service,
IEEE 802.1X for Authentication,
IEEE 802.3ad for Port Trunk with LACP |
|
|
|
| IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog |
|
|
|
| MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
|
|
|
| IEEE 802.3x flow control, back pressure flow control |
|
|
|
|
| |
| Switch Properties |
|
|
|
| Max. Number of Available VLANs |
|
|
|
|
|
|
|
|
| |
| Interface |
|
|
| 6 slots for any combination of 4-port interface module with 10/100BaseT(X) or 100BaseFX |
|
|
|
| 2 slots for any combination of 2-port interface module with 10/100/1000BaseT(X) or 1000BaseSFP slot |
|
|
|
|
|
| STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RING |
|
|
|
| LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEED |
|
|
|
| Two relay outputs with current carrying capacity of 1A @ 24 VDC |
|
|
|
Two inputs with the same ground, but electrically isolated from the electronics
‧ +13 to +30V for state “1”
‧ -30 to +3V for state “0”
‧ Max. input current: 8 mA |
|
|
|
|
| |
| Power Requirements |
|
|
| 24 VDC (12 to 45 VDC), redundant dual inputs |
|
|
|
|
|
| Two removable 6-pin terminal blocks |
|
|
| Overload Current Protection |
|
|
| Reverse Polarity Protection |
|
|
|
|
| |
| Physical Characteristics |
|
|
|
|
|
|
|
|
| DIN-Rail mounting, wall mounting (optional kit) |
|
|
|
|
| |
| Environmental Limits |
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
| Ambient Relative Humidity |
|
| 5 to 95% (non-condensing) |
|
|
|
| |
| Regulatory Approvals |
|
| UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending) |
|
|
|
UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending);
ATEX Class I, Zone 2, Ex nC IIC (Pending) |
|
|
|
| DNV (Pending), GL (Pending) |
|
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12 |
|
|
|
|
|
|
|
|
|
160,000 hrs
Database: Telcordia (Bellcore), GB |
|
|
|
| |
| Warranty |
|
| |
| |
| Gigabit Ethernet Interface Modules, IM-2G series |
 |
 |
IM-2GTX |
IM-2GSFP |
|
| Interface |
|
|
|
| 10/100/1000BaseT(X) auto negotiation speed, and auto MDI/MDI-X connection |
|
|
|
|
|
|
| |
| Power Requirements |
|
|
IM-2GTX: 2.96W
IM-2GSFP: 3.042W |
|
|
|
|
| |
| Physical Characteristics |
|
|
| 24 x 65.9 x 101.1 mm (0.94 x 2.59 x 3.98 in.) |
|
|
|
IM-2GTX: 150 g
IM-2GSFP: 148 g |
|
|
|
|
| |
| |
| Fast Ethernet Interface Modules, IM series |
 |
 |
 |
 |
 |
 |
IM-4TX |
IM-2MSC/2TX
IM-2SSC/2TX |
IM-2MST/2TX |
IM-1LSC/3TX |
IM-4MSC
IM-4SSC |
IM-4MST |
|
|
| Interface |
|
|
| PWR, P1, P2, P3, P4 port status |
|
|
|
| 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
|
|
|
| 100BaseFX ports (SC/ST connector) |
|
|
|
|
| |
| Optical Fiber |
|
|
Multi Mode |
Single Mode |
Single Mode,
80 km |
| Wavelength |
1300 nm |
1310 nm |
1550 nm |
| Max. TX |
-10 dBm |
0 dBm |
0 dBm |
| Min. TX |
-20 dBm |
-5 dBm |
-5 dBm |
| RX Sensitivity |
-32 dBm |
-34 dBm |
-34 dBm |
| Link Budget |
12 dB |
29 dB |
29 dB |
| Typical Distance |
5 kma, 4 kmb |
40 kmc |
80 kmd |
| Saturation |
-6 dBm |
-3 dBm |
-3 dBm |
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
d. 9/125 μm, 19 PS/(nm*km) fiber optic cable |
|
|
|
|
| |
| Power Requirements |
|
|
IM-4TX: 2.5W
IM-2MSC/2TX: 5W
IM-2MST/2TX: 5W
IM-2SSC/2TX: 5W
IM-4MSC: 7.2W
IM-4MST: 7.2W
IM-4SSC: 7.2W
IM-1LSC/3TX: 4W |
|
|
|
|
|
| |
| Physical Characteristics |
|
|
|
|
| 40 x 127.8 x 100 mm (1.57 x 5.03 x 3.94 in.) |
|
|
|
IM-4TX: 215 g
IM-2MSC/2TX: 245 g
IM-2MST/2TX: 250 g
IM-2SSC/2TX: 245 g
IM-1LSC/3TX: 235 g
IM-4MSC: 250 g
IM-4MST: 270 g
IM-4SSC: 270 g |
|
|
|
|
| |
| MTBF |
|
|
620,000 hrs
Database: MIL-HDBK-217F, GB 25°C |
|
|
|
|
| |
|
|
